Skip to content

Stainless Steel Restaurant Exhaust Hoods- Exhaust Only


Stainless Steel Exhaust Hoods - Exhaust Only (Stainless Steel where Exposed)

Stainless steel exhaust hoods


 

Overview

Commercial kitchen stainless steel exhaust hoods from Hoodmart.com are the most important and most commonly underappreciated part of your restaurant and the ventilation system that connects to it. These stainless steel exhaust hoods equipped with high-powered fans or blowers remove odors and improve the indoor air quality inside your kitchen. Commercial kitchen fans also remove moisture, which can increase the level of humidity. Of course we all know that high humidity can cause mold, mildew and bacteria growth which ultimately results in major health code violations. The hoods are constructed with 430 stainless steel where exposed. The stainless steel is polished to a number 3 finish.

Vented kitchen fans help to maintain proper indoor air quality. They also help remove pollutants, cooking odors, moisture and grease from the restaurant's kitchen. Commercial kitchen range hoods must deal effectively with grease to expel this odor. One reason that commercial kitchen fans are so powerful is that they must maintain the proper velocity to draw all cooking contaminants into the hood. If this is not accomplished properly, grease gets deposited throughout the kitchen, creating a severe fire hazard and the risk of a kitchen fire. Because of this, commercial kitchen stainless steel exhaust hoods differ drastically from those of residential exhaust hoods.

Restaurant kitchen fans are important to maintaining indoor air quality. The properly sized exhaust hood system will help make sure that "proper breathing." of the restaurant kitchen is achieved. These restaurant and commercial hood systems must be properly installed by certified technicians and they also must be performance-tested to for proper ventilation.

 

Features

All hoods are constructed of 18 gauge steel

All joints are welded liquid tight, without seams by an automatic wire fed mig welder

All hoods are built in accordance to NFPA 96, NSF specifications, & U.L. 710 specifications

Grease trough is made to receive grease extracted by filters

Grease filters are of baffle type (20’’ wide) and carry a U.L. listing. They are made from a light weight aluminum steel

A stainless steel cup attaches to the tray that runs beneath the entire length of the hood

 

Specs

Hoodmart Exhaust Only Hood Specs

Today's Hot Deals from HoodMart.com