TK1-1PH - DIRECT GAS FIRED HEATED SUPPLY AIR

Direct Fired Gas Heated Supply Air. Gas-Fired Tempered Make-Up Air Unit\Maximum 2,500 CFM's, Belt Driven, 115/208/230V, 1-Phase with Motorized Damper and 10" Blower

• Recommended for hood Sizes 7-12.
• Supply fan handles a Maximum of 2,500 CFM's @ 0.5" wg ESP.
• Made in USA
• Adjustable CFM Range 1,000-2,500.
• Max Temperature Rise of 100 Deg F. 270,000 BTU's, Natural Gas/LP Burner.
• 1.500 HP, 1 Phase, 115/208/230V, 60 Hz, ODP (Open Drip Proof).
• 10" Blower.
• Motorized Back-Draft Damper.
• Curb or Indoor Hanging Cradle (Hanging Rods by Others).
• Curb Insulation Available.
• 24 month parts-only warranty.

Features

• Sloped Screened Intake with Washable Metal Mesh Filters
• Discharge Temperature Control - 40-90 degree F (4-32 degree C)
• 3/4" Gas Line Manifold Constructed in Conformance to ANSI Standards
• 24 month parts-only warranty

Overview

Direct Gas-Fired Heater, for use in tempering make-up air. Packages are certified to the ANSI Z83.4a-2001/CSA 3.7a-2001 combined safety standard. One size is available with a max BTU rate of 275,000 and 2,500 CFM. Housing constructed of heavy duty G90 galvanized steel • Forward curved centrifugal blower wheel • Vibration isolation • Adjustable drive assemblies • Adjustable motor mount • Ball bearing motors • Heavy duty, pre-lubricated bearings rated for 200,000 hours of operation • Static resistant belts • Service doors on both sides • Horizontal & down discharge • Large intake area ensures low pressure drop across unit • Spring loaded profile plates automatically adjust for any airflow - no manual setting required! • Weatherproof safety disconnect switch • Modular design provides design flexibility • Fully insulated casing.