TK3-1PH - DIRECT GAS FIRED HEATED SUPPLY AIR

Makeup Air Fans. Gas-Fired Tempered Make-Up Air Unit\Maximum 6,200 CFM's, 208/230V, 1-Phase with Motorized Damper and a 18" Blower.

• Recommended for hood Sizes 19-25.
• Supply fan handles a Maximum of 6,200 CFM's @ 0.5" wg ESP.
• Adjustable CFM Range 3,500-6,200.
• Factory installed VFD - 3PH motor to work with 1PH power.
• Max Temperature Rise of 100 Deg F. 669,600 BTU's, Natural Gas/LP Burner.
• 3.000 HP, 1 Phase, 208/230V, 60 Hz, ODP (Open Drip Proof).
• 18" Blower.
• Motorized Back-Draft Damper.
• Curb or Indoor Hanging Cradle (Hanging Rods by Others).
• Curb Insulation Available.
• 24 month parts-only warranty.

Features

• Sloped Screened Intake with Washable Metal Mesh Filters
• Discharge Temperature Control - 40-90 degree F (4-32 degree C)
• Made in USA
• 1" Gas Line Manifold Constructed in Conformance to ANSI Standards
• 24 month parts-only warranty

Overview

Direct Gas-Fired Heater, for use in tempering make-up air. Packages are certified to the ANSI Z83.4a-2001/CSA 3.7a-2001 combined safety standard. One size is available with a max BTU rate of 825,000 and 6,200 CFM. Housing constructed of heavy duty G90 galvanized steel • Forward curved centrifugal blower wheel • Vibration isolation • Adjustable drive assemblies • Adjustable motor mount • Ball bearing motors • Heavy duty, pre-lubricated bearings rated for 200,000 hours of operation • Static resistant belts • Service doors on both sides • Horizontal & down discharge • Large intake area ensures low pressure drop across unit • Spring loaded profile plates automatically adjust for any airflow - no manual setting required! • Weatherproof safety disconnect switch • Modular design provides design flexibility • Fully insulated casing.