TK5-EVAP-3PH - DIRECT GAS FIRED MAKEUP AIR UNIT/EVAP

Gas-Fired Tempered Make-Up Air Unit with Evaporative Cooler/Maximum 14,000 CFM's, 208/230/460V, 3-Phase with Motorized Damper and a 25" Blower

• Recommended for hood Sizes 18+
• Gas-Fired Tempered Make-Up Air Unit with Evaporative Cooler handles a Maximum of 14,000 CFM's @ 0.5"" wg ESP
• Adjustable CFM Range 10,000-14,000
• Max Temperature Rise of 100 Deg F. 1,512,000 BTU's, Natural Gas/LP Burner
• 10.00 HP, 3 Phase, 208/230/460V, 60 Hz, ODP (Open Drip Proof Premium (E-Plus3) Eff.)
• 25" Blower.
• Motorized Back-Draft Damper.
• Curb or Indoor Hanging Cradle (Hanging Rods by Others).
• Curb Insulation Available.
• 2 Year Parts Only Warranty.

Features

• Sloped Screened Intake with Washable Metal Mesh Filters
• Discharge Temperature Control - 40-90 degree F (4-32 degree C)
• Made in USA
• 1 1/2" Gas Line Manifold Constructed in Conformance to ANSI Standards
• 2 Year Parts Only Warranty

Overview

Direct Gas-Fired Heater, for use in tempering make-up air. Packages are certified to the ANSI Z83.4a-2001/CSA 3.7a-2001 combined safety standard. One size is available with a max BTU rate of 1,512,000 and 14,000 CFM. Housing constructed of heavy duty G90 galvanized steel • Forward curved centrifugal blower wheel • Vibration isolation • Adjustable drive assemblies • Adjustable motor mount • Ball bearing motors • Heavy duty, pre-lubricated bearings rated for 200,000 hours of operation • Static resistant belts • Service doors on both sides • Horizontal & down discharge • Large intake area ensures low pressure drop across unit • Spring loaded profile plates automatically adjust for any airflow - no manual setting required! • Weatherproof safety disconnect switch • Modular design provides design flexibility • Fully insulated casing. With direct evaporative cooling, outside air is drawn through a water-saturated medium and cooled by evaporation.