TK76-3PH - LOW CFM DIRECT FIRED GAS HEATED SUPPLY AIR

Direct Fired Gas Heated Supply Air. Gas-Fired Tempered Make-Up Air Unit\Maximum 1,200 CFM's, Belt Driven, 208/230/460V, 3- Phase with Motorized Damper and 7" Blower

• Recommended for hood Sizes 4-6.
• Supply fan handles a Maximum of 1,200 CFM's @ 0.5" wg ESP.
• Made in USA
• Adjustable CFM Range 600-1,200.
• Max Temperature Rise of 100 Deg F. 129,600 BTU's, Natural Gas/LP Burner.
• 1.000 HP, 3 Phase, 208/230/460V, 60 Hz, ODP (Open Drip Proof).
• 7" Blower.
• Motorized Back-Draft Damper.
• Curb or Indoor Hanging Cradle (Hanging Rods by Others).
• Curb Insulation Available.
• 24 month parts-only warranty.

Features

• Sloped Screened Intake with Washable Metal Mesh Filters
• Discharge Temperature Control - 40-90 degree F (4-32 degree C)
• 1/2" Gas Line Manifold Constructed in Conformance to ANSI Standards
• 24 month parts-only warranty

Overview

Direct Gas-Fired Heater, for use in tempering make-up air. Packages are certified to the ANSI Z83.4a-2001/CSA 3.7a-2001 combined safety standard. One size is available with a max BTU rate of 129,600 and 1,200 CFM. Units are designed for natural or propane applications and are rated for indoor/outdoor installations in commercial occupancies. A unique feature is the self-adjusting burner profile plates allowing 2-speed and variable-air-volume applications. The plates ensure proper air velocity and pressure drop across the burner for clean combustion. Spring-loaded profile plates react to the momentum of the fresh air stream, therefore, no motors or actuators are needed to drive them, nor do they need to be manually set to a specific position.