TK4-DX-3PH - DIRECT GAS FIRED TEMPERED MAKEUP AIR UNIT/DX
SKU:
TK4-DX-3PH-FF

TK4-DX-3PH - DIRECT GAS FIRED TEMPERED MAKEUP AIR UNIT/DX

Gas-Fired Tempered Make-Up Air Unit with Direct Expansion/Maximum 9,000 CFM's, 208/230/460V, 3-Phase with Motorized Damper and a 20" Blower


  • Gas-Fired Tempered Make-Up Air Unit with Direct Expansion handles a Maximum of 9,000 CFM's @ 0.5" wg ESP
  • Max Temperature Rise of 100 Deg F. 972,000 BTU's, Natural Gas/LP Burner
  • 15 Ton, Three Circuit DX Cooling
  • Adjustable CFM Range 6000-9000
  • Fully Packaged Unit with 14 SEER Condensing Unit(s)
  • 7.500 HP, 3 Phase, 208/230/460V, 60 Hz, ODP (Open Drip Proof)
  • 20" Blower
  • Motorized Back-Draft Damper
  • Curb Mount
  • Curb Insulation Available
  • 2 Year Parts Only Warranty
  • Recommended for hood Sizes 19+

Features

  • Sloped Screened Intake with Washable Metal Mesh Filters
  • Discharge Temperature Control - 40-90 degree F (4-32 degree C)
  • Made in USA
  • 3/4"" Gas Line Manifold Constructed in Conformance to ANSI Standards
  • 2 Year Parts Only Warranty
  • Heavy Gauge Stainless Steel Condensate Pans

Overview

Direct Gas-Fired Heater, for use in tempering make-up air. Packages are certified to the ANSI Z83.4a-2001/CSA 3.7a-2001 combined safety standard. One size is available with a max BTU rate of 972,000 and 9,000 CFM. Housing constructed of heavy duty G90 galvanized steel • Forward curved centrifugal blower wheel • Vibration isolation • Adjustable drive assemblies • Adjustable motor mount • Ball bearing motors • Heavy duty, pre-lubricated bearings rated for 200,000 hours of operation • Static resistant belts • Service doors on both sides • Horizontal & down discharge • Large intake area ensures low pressure drop across unit • Spring loaded profile plates automatically adjust for any airflow - no manual setting required! • Weatherproof safety disconnect switch • Modular design provides design flexibility • Fully insulated casing. With DX cooling, refrigerant flows through the evaporator coils to absorb heat, thus cooling and dehumidifying the air. A compressor moves the coolant through the coils and a condenser removes the absorbed heat for exhaust outside

LET US HELP YOU

How Can We Help You?

What Type of Hood Do You Need?

Experts Are Ready to Help You:

Custom Size Hoods

Ship in 5-7 Business Days.

Talk To A Specialist

Factory Support For All Questions.

CALL 24/7 1.800.715.1014

TK4-DX-3PH - DIRECT GAS FIRED TEMPERED MAKEUP AIR UNIT/DX

SKU:
TK4-DX-3PH-FF
Original Price $33,082.03 Your Price $30,435.46
Loading...
Shipping Estimator
In stock
TK4-DX-3PH - DIRECT GAS FIRED TEMPERED MAKEUP AIR UNIT/DX
TK4-DX-3PH - DIRECT GAS FIRED TEMPERED MAKEUP AIR UNIT/DX TK4-DX-3PH - DIRECT GAS FIRED TEMPERED MAKEUP AIR UNIT/DX

TK4-DX-3PH - DIRECT GAS FIRED TEMPERED MAKEUP AIR UNIT/DX

Gas-Fired Tempered Make-Up Air Unit with Direct Expansion/Maximum 9,000 CFM's, 208/230/460V, 3-Phase with Motorized Damper and a 20" Blower


  • Gas-Fired Tempered Make-Up Air Unit with Direct Expansion handles a Maximum of 9,000 CFM's @ 0.5" wg ESP
  • Max Temperature Rise of 100 Deg F. 972,000 BTU's, Natural Gas/LP Burner
  • 15 Ton, Three Circuit DX Cooling
  • Adjustable CFM Range 6000-9000
  • Fully Packaged Unit with 14 SEER Condensing Unit(s)
  • 7.500 HP, 3 Phase, 208/230/460V, 60 Hz, ODP (Open Drip Proof)
  • 20" Blower
  • Motorized Back-Draft Damper
  • Curb Mount
  • Curb Insulation Available
  • 2 Year Parts Only Warranty
  • Recommended for hood Sizes 19+

Features

  • Sloped Screened Intake with Washable Metal Mesh Filters
  • Discharge Temperature Control - 40-90 degree F (4-32 degree C)
  • Made in USA
  • 3/4"" Gas Line Manifold Constructed in Conformance to ANSI Standards
  • 2 Year Parts Only Warranty
  • Heavy Gauge Stainless Steel Condensate Pans

Overview

Direct Gas-Fired Heater, for use in tempering make-up air. Packages are certified to the ANSI Z83.4a-2001/CSA 3.7a-2001 combined safety standard. One size is available with a max BTU rate of 972,000 and 9,000 CFM. Housing constructed of heavy duty G90 galvanized steel • Forward curved centrifugal blower wheel • Vibration isolation • Adjustable drive assemblies • Adjustable motor mount • Ball bearing motors • Heavy duty, pre-lubricated bearings rated for 200,000 hours of operation • Static resistant belts • Service doors on both sides • Horizontal & down discharge • Large intake area ensures low pressure drop across unit • Spring loaded profile plates automatically adjust for any airflow - no manual setting required! • Weatherproof safety disconnect switch • Modular design provides design flexibility • Fully insulated casing. With DX cooling, refrigerant flows through the evaporator coils to absorb heat, thus cooling and dehumidifying the air. A compressor moves the coolant through the coils and a condenser removes the absorbed heat for exhaust outside

Adobe PDF Downloads Spec Sheet Downloads:
Get More Information
Attention CA Residents: Prop 65 Warning